HT3 Cherry

3HT

Fritz Audio/Video Home Theater Loudspeakers

All Fritz Audio/video loudspeakers are sonically matched and
are excellent for music & spectacular in Home Theater systems

Mon450

Fritz Monitors
2 Way High-Definition stand mounted monitor

Frequency Response:

42 Hz to 20 kHz +/- 3 db

Impedance:

8 ohms Nominal

Sensitivity:

88 dB (at 1 watt, 2.83V, @1 meter)

Bass/Midrange Driver:

6 1/2" Mineral-filled Polypropylene composition driver, cast magnesium alloy chassis with large voice & magnet, bass reflex loaded rear port, available sheilded for Home Theater systems

Tweeter:

1" double chamber; ferro fluid-cooled fabric dome with liner response, low distortion and wide dispersion

Crossover:

Internal, utilizing large, low loss inductors and metalized polypropylene capacitors at 3000 Hz, 12dB tweeter, 6dB woofer

Dimensions/Weight:

16H x 8W x 10D, 18lbs.

Recommended Amplifiers:

20 to 150 watts, not clipping
 

Fritz Jr Monitors
A smaller compact model that has the same high performance
drivers & crossover components that are used in the standard model

Frequency Response:

48 Hz to 20 kHz +/- 3 db

Impedance:

8 ohms Nominal

Sensitivity:

88 dB (at 1 watt, 2.83V, @1 meter)

Bass/Midrange Driver:

6 1/2" Mineral-filled Polypropylene composition driver, cast magnesium alloy chassis with large voice & magnet, bass reflex loaded rear port, available sheilded for Home Theater systems

Tweeter:

1" double chamber; ferro fluid-cooled fabric dome with liner response, low distortion and wide dispersion

Crossover:

Internal, utilizing large, low loss inductors and metalized polypropylene capacitors at 3000 Hz, 12dB tweeter, 6dB woofer

Dimensions/Weight:

12H x 8W x 7D, 14lbs.

Recommended Amplifiers:

20 to 150 watts, not clipping
 

Fritz LCR SYSTEM
Dual 6 1/2 inch 2 way High-Definition vented stand mounted

loudspeakers available shielded for Home Theater systems

Frequency Response:

40 Hz to 20 kHz +/- 3 db

Impedance:

4 ohms Nominal

Sensitivity:

91 dB (at 1 watt, 2.83V, @1 meter)

Bass/Midrange Driver:

dual 6 1/2" Mineral-filled Polypropylene composition driver, cast magnesium alloy chassis with large voice & magnet, bass reflex loaded rear port, available sheilded for Home Theater systems

Tweeter:

1" double chamber; ferro fluid-cooled fabric dome with liner response, low distortion and wide dispersion

Crossover:

Internal, utilizing large, low loss inductors and metalized polypropylene capacitors at 3000 Hz, 12dB tweeter, 6dB woofer

Dimensions/Weight:

23H x 8W x 12D, when used as horizonal center channel; 23W x 8H x 12D, 35lbs. (each)

Recommended Amplifiers:

25 to 200 Watts RMS, without clipping
 

Go to the Fritzspeakers.com Home Page