Fritz LS 7 Illuminator Monitor
2 Way vented stand mounted monitor

Frequency Response:

38Hz-30Khz +/- 3 db

Impedance:

8 Ohms nominal

Sensitivity:

85.4 db (1 Watt, 2.83 V @ 1 Meter)

Bass/Midrange Driver:

7" ScanSpeak paper Illuminator woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent pending motor offers a very long linear excursion together with a very high force factor. The top plate is shaped to “guide” the backside airflow around the motor and with the very open cast aluminum chassis design the driver is virtually free from compression.

Tweeter:

Top of the line ScanSpeak Revelator is a 1" soft dome with large surround. The carefully designed dome and surround result in a linear response and an exceptionally good off axis response. A specially designed venting system uses a needle to cut down on turbulence in the air cavity. Better dynamics are achieved by not using ferrofluid, voice coil cooling is performed by the venting system and conduction through copper rings. The new large ring SD-2 neodymium magnet system improves transient response.

ScanSpeak’s unique AirCirc Magnet System -- named for the way it optimizes air flow within the chamber –- rearranges the traditional magnet structure from a single magnet to an open magnetic circuit comprised of six separate neodymium slugs. This, in combination with the chamber, results in the elimination of the reflections and resonances that compromise the performance of traditional motors. 

Crossover:

Series crossover without any capacitors or resistors in the circuit with the tweeter. Acoustic Reality Series Crossovers

Dimensions/Weight:

16H x 9W x 12D, 30 lbs (each)

Recommended Power:

8 - 200 Watts RMS, without clipping

For more information or to arrange a home audition call 310-379-8190

Go to the Fritzspeakers.com Home Page