Frequency Response: |
42Hz-25Khz +/- 3 db |
Impedance: |
8 Ohms nominal |
Sensitivity: |
87 db (1 Watt, 2.83 V @ 1 Meter) |
Bass/Midrange Driver: |
6 1/2 inch Hemp Cone bass/midrange driver with cast frame, NBR rubber surround & large vented magnet. Tone of a paper cone woofer with the speed and power of synthetic materials. |
Tweeter: |
1 Inch ScanSpeak Discovery
tweeter uses a very light, low mass “soft dome" with high internal
damping, and a highly-optimized, low-compression double magnet system,
which was designed especially for the low mass dome. The result
is a driver that has both good sensitivity and an impressive range
into the lower frequencies. The low mass dome, coupled with a fully
vented motor system provides non-compressed sound reproduction over
the entire frequency response. |
Crossover: |
Series crossover without
any capacitors or resistors in the circuit with the tweeter |
Dimensions/Weight: |
13H x 7 1/2W x 12D, 24 lbs (each) |
Recommended Power: |
60-150 Watts RMS, without clipping |